Studio Technologies Model 5412-02

Studio Technologies Model 5412-02 Audio Interface

$3,175.00
(No reviews yet)
Weight:
3.20 LBS
Width:
24.00 (in)
Height:
4.00 (in)
Depth:
10.00 (in)
Current Stock:
Adding to cart… The item has been added
Description

Model 5412-02 Audio Interface

Order Code:  M5412-02

The Model 5412 Audio Interface provides a simple yet high-performance means of interfacing line-level analog signals with applications that utilize Dante® audio-over-Ethernet media networking technology. The Model 5412 is available in two versions – one with 8 input and 8 output channels and the other with 16 input and 16 output channels.

Key Features

 

  • Two versions available: 8 or 16 input and output channels
  • Analog line-level inputs to Dante outputs
  • Special analog mixer function for matrix intercom applications (can be used as an all-digital replacement for RTS® MDA-100)
  • Dante inputs to analog line-level outputs
  • Three Gigabit Ethernet interfaces
  • Standard connectors
  • Excellent audio quality
  • AC mains and 12 volt DC powering
  • Lightweight enclosure, single rack-space (1U) mounting

Versions Available:
Model 5412-01: 8 line-level analog inputs and 8 line-level analog outputs
Model 5412-02: 16 line-level analog inputs and 16 line-level analog outputs

Network Audio Technology:
Type: Dante audio-over-Ethernet
AES67-2018 Support: yes
Dante Domain Manager™ (DDM) Support: yes
Ethernet Interface Configuration: Switched or Redundant
Sample Rates: 44.1, 48, 88.2, and 96 kHz
Bit Depth: up to 24
Number of Dante Transmitter (Output) Channels: 8 (Model 5412-01) or 16 (Model 5412-02)
Number of Dante Receiver (Input) Channels: 8 (Model 5412-01) or 16 (Model 5412-02)
Number of Dante Flows: 32 transmitter, 32 receiver

Network Interfaces:
Qty: 3; Dante Primary, Dante Secondary, and Management
Type: 1000BASE-T Gigabit Ethernet (GigE) per IEEE 802.3ab (100 Mb/s also supported but not recommended for optimal performance; 10 Mb/s not supported)
Ethernet Connection NIC Status LEDs: one link and one activity for each Ethernet interface

Remote Configuration Capability: uses webpages provided by internal web server

Analog Inputs:
Type: electronically balanced, capacitor coupled, intended for connection to balanced (differential) or unbalanced signal sources
Impedance: 20 k ohms
Nominal Level: +4 dBu, reference –20 dBFS, adjustable ±20 dB in 0.1-dB steps
Maximum Level: +24 dBu, results in digital output level of 0 dBFS
Dynamic Range: 120 dB, A-weighted
Distortion (THD+N): <0.0004% (–108 dB), ref 1 kHz, +23 dBu input/–1 dBFS output
Frequency Response: ±0.2 dB, 14 Hz to 20 kHz

Analog Outputs:
Type: electronically balanced, capacitor coupled, intended to drive balanced or unbalanced loads of 2 k ohms or greater
Source Impedance: 200 ohms
Nominal Level: +4 dBu, reference –20 dBFS, adjustable ±20 dB in 0.1-dB steps
Maximum Level: +24 dBu
Dynamic Range: >119 dB, A-weighted
Distortion (THD+N): <0.001% (–101 dB), reference 1 kHz, –1 dBFS input/+23 dBu output
Frequency Response: ±0.1 dB, 6 Hz to 20 kHz

1 kHz Tone Output:
Analog: 1 kHz sine-wave at +4 dBu, nominal, adjustable ±20 dB in 0.1-dB steps
Dante (Digital): sine-wave at –20 dBFS, fixed

Front-Panel Display: backlit LCD

Software Updating: USB flash drive supports updating of Main MCU and Main FPGA firmware (embedded software); Dante interface updated via Ethernet interface

Power Sources:
AC Mains: 100 to 240 V, 50/60 Hz, 20 W maximum
DC: 10 to 18 V, 1.5 A maximum: 120 uA nominal with 12 volts DC and AC mains present, 170 uA nominal with 18 volts DC and AC mains present

Connectors:
Analog Inputs and Analog Outputs: 25-pin female D-subminiature (DB-25F), AES59-2012-compliant
Ethernet: 3, RJ45 jack
USB: type A receptacle (used only for updating firmware)
AC Mains Input: 3-blade, IEC 320 C14-compatible (mates with IEC 320 C13)
DC Input: 4-pin male XLR (pin 1 negative, pin 4 positive)

Environmental:
Operating Temperature: 0 to 50 degrees C (32 to 122 degrees F)
Storage Temperature: –40 to 70 degrees C (–40 to 158 degrees F)
Humidity: 5 to 95%, non-condensing
Altitude: not characterized

Dimensions – Overall:
19.0 inches wide (48.3 cm)
1.72 inches high (4.4 cm)
7.8 inches deep (19.8 cm); 8.3 inches (21.1 cm) overall

Mounting: one space (1U) in a standard 19-inch rack

Weight: 3.2 pounds (1.5 kg)

Type a description for this product here...