Bolt 300 HDMI Video Rx Only

(No reviews yet) Write a Review
1.00 LBS

Product Overview

What's In The Box?

  • 1 x Thumb Screw 1.25 inch length (1/4"-20 inch)
  • 1 x Lightstand Adapter (1/4"-20 inch)
  • 1 x SDI (BNC to BNC) Cable 10 inch
  • 1 x USB 3.0 Cable A to Micro B (3ft Length)
  • 1 x PSU 2-Pin Lemo to 18W AC Adapter 6ft cable
  • 1 x 1-Year Warranty1 x HDMI 18in Cable (Type A to Type A)

Video -

Video Outputs

  • 1 x 75 Ohm BNC
  • 1 x USB 3.0 micro B receptacle
  • 1 x Type A receptacle HDMI

Sdi Ancillary Data Support

  • Supports transmitting metadata, timecode, and start/stop flags from certain camera manufacturers. Please refer to:

Usb30 Grab Engine Summary

  • ~checkmark~

Inputoutput Summary

  • 3G-SDI & HDMI

Color Sampling

  • HDMI: RGB 4:4:4, 8-bit

Tx Hdmi Sdi Converter Summary

  • ~x~

Latency Summary

  • <0.001 seconds

Delay Tx To Rx

  • <0.001sec (when no video format conversion is enabled)

Supported Resolutions -

Resolution Frame Rate Summary

  • 1080p60

Video Processing -

Video Compression

  • visually lossless

Test Pattern Generator Support

  • Custom output formatted test pattern over HDMI and SDI.

Video Format Conversion Suport

  • Built in Video Scaler and Deinterlacer

Color Correction

  • CDL/1024 1D LUT (supports 10-bit color)
  • 33x33x33 3D LUT (supports 10-bit color)

Protocol Support -


  • AES-128

Audio Processing -

Audio Compression

  • 48kHz 24-bit PCM

Physical -

Size Tx Summary

  • 27 x 66.1 x 112.3 mm


  • 1.0" x 3.5" x 5.8" (25.2 x 88.9 x 146.5mm)

Weight Tx Rx Summary

  • 262g / 346 g


  • 12.2oz [346g]


  • Milled Aluminum(Chassis) and regulation-compliant PCB
  • Plastic Cap

Interfaces -


  • None

Front Panel Summary

  • None

Configuration Interfaces

  • On Screen Display on Video Output, Windows/Mac Desktop configuration utility


  • On/Off and Reset Switch

Desktop App

  • Feature-rich Bolt Manager Application for OSX & Windows

Usb Interface Functionality

  • Upgrade via Mini-USB

Network -


  • Non-DFS Frequencies:
  • US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
  • EU & JP: 5.19 ~ 5.23 GHz
  • DFS Frequencies:
  • US: 5.27 ~ 5.55 GHz and 5.67 GHz
  • EU & JP: 5.27 ~ 5.67 GHz

Rf Channel Selection

  • Auto only
  • (NOT configurable)

Rf Power

  • 15dBm EIRP

Range Summary

  • ~bold~300 ft


  • Up to 300ft line of sight

Multicast Summary

  • Up to 4 RX

Unicast Multicast

  • 1 Bolt TX can transmit to a maximum of 4 RX

Noise Rejection

  • Can coexist with WiFi and 5GHz cordless phones

Rapid Reconnect Summary

  • ~x~

Number Of20 Mhz Channels Summary

  • 0

Number Of40 Mhz Channels Summary

  • 9

Power -

Power Input

  • 2-Pin Connector 7-28 VDC


  • None

Nominal Power Consumption

  • 8.2 Watts (Measured at 1080p60)

General -


  • Multiple mounting options with 1/4" holes

Gen1 Sidekick Compatible Summary

  • ~checkmark~

Metadata Support Summary

  • ~checkmark~
  • Overview

    The Teradek Bolt is a zero delay (< 1ms) wireless video system that transmits uncompressed 1080p60, 4:2:2 video up to 2,000ft over the unlicensed 5GHz band. The Bolt line-up comes in 3 ranges: 300, 600, and 2,000ft. The Bolt 300 has internal antennas, while the 600 and 2000 models have external antennas and an OLED screen for settings selection. All Bolt models are multicast capable up to 4 receivers, support timecode and metadata pass through, and include the USB 3.0 GRAB Engine.

    3D LUT Integration

    All Bolt receivers now have integrated 3D LUTs that output custom graded video, which is ideal for directors and producers who want to monitor footage with a color palette that’s closer to final grade rather than a flat RAW image. Custom LUTs can be loaded via the Bolt Manager and selected on individual Bolt Receiver OLED screens .

    Long Range Panel Antenna

    To get the most out of your Bolt system, the Panel Antenna is a go-to accessory for challenging environments that require robust reliability in high RF interference areas. This high gain antenna is compatible with the Bolt 600 and 2000, complete with mounting hardware and a convenient bracket for positioning the Bolt’s signal exactly where you need it .

    Real-Time Cross Conversion & Extras

    For added convenience, all Bolt models support real-time cross conversion from TX to RX, letting you automatically cross convert from HDMI to 3G-SDI, or vice versa, without any extra hardware. All Bolts include real-time standards conversion of resolution and/or frame rate control directly on-board the receiver OLED.

    USB 3.0 GRAB Engine

    Capture cards are a thing of the past with Teradek’s new GRAB Engine. Every Bolt RX includes a USB 3.0 output that allows you to ingest Bolt’s uncompressed video feed directly into a computer or DIT cart without added delay .


(No reviews yet) Write a Review