Comes with a Bolt Pro 3000 3G-SDI Transmitter, a Bolt Pro 3000 3G-SDI Receiver, and a case
General
2 x SDI BNC to BNC 10 in. Cable
1 x Protective SKB Case - military-standard waterproof hard case with custom foam (13.5in x 9.5in x 6.5in - 34.29cm x 24.13cm x 16.51cm)
1 x 1-Year Warranty
Transmitter
2 x Wireless Antennas (5dBi 5.8GHz)
1 x 2-pin Lemo to PowerTap 18 inch Cable
1 x Hot Shoe Adapter (1/4"-20 inch)
1-Year Warranty
Receiver
1 x Lightstand Adapter (1/4"-20 inch)
1 x Thumb Screw Plastic Head 1/4-20 thread, 1.25 length
1 x PSU 2-Pin Lemo to 18W AC Adapter 6ft cable
5 x Wireless Antennas (2dBi 2.4/5.8GHz) - For Rx
1 x USB 3.0 Cable A to Micro B (3ft Length)
1-Year Warranty
Overview
With highly refined software, new wireless radios, and a redesigned chassis, these new models are the most reliable and capable monitoring solutions we have ever built. Metadata and timecode support, 3D LUTs, dual inputs/outputs, multicast capable (1 Transmitter can multicast up to 4 Receivers), manual frequency selection and USB 3.0 GRAB Engine are all included on these new models but with the following new features:
Longer Range
Transmit visually lossless video up to 3000ft with no delay.
20MHz Channels
Use more than twice as many Bolts in one location or avoid interference like never before.
2 New DFS Channels
Operate interference-free more often in the USA and Europe by making use of two newly introduced DFS channels.
20% Smaller Chassis
Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed.
Individual Identity
Easily identify which Bolt TX and RX work together with removable colored top plates.
Rapid Reconnection
Reconnect times during a dropped link are now instantaneous once you move back into range.
Built-In HDMI to SDI Converter
Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device.
More Robust Than Ever Before
Reach your Bolt’s full range and potential right out of the box with new software that provides the most robust wireless link we’ve ever created.
Technical Specifications
Click on each category to see the relevant tech specs OR click this button:
Bolt Pro 3000 3G-SDI Tx
Video -
Video Inputs
• 1 x 75 Ohm BNC
Video Outputs
• 1 x 75 Ohm BNC(Loop-out)
Color Sampling
• Y:Cb:Cr = 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v.1.1.0 or later)
Delay Tx To Rx
• <0.001sec (when no video format conversion is enabled)
Inputs -
Supported Resolutions
• 1080p60/59.94/50/30/29.97/25/24/23.98
• 1080psf30/29.97/25/24/23.98
• 1080i60/59.94/50
• 720p60/59.94/50
• 480i(NTSC)/576i(PAL)
Protocol Support -
Encryption
• AES-128
Audio Processing -
Audio Compression
• 48kHz 24-bit PCM
Physical -
Dimensions
• 0.95" x 2.6" x 4.47" (24 x 66 x 101.5 mm)
Weight
• 8oz(226g)
Chassis Material
• Milled Aluminum
Interfaces -
Frontpanel
• None
Desktop App
• Feature-rich Bolt Manager Application for OSX & Windows
Usb Power
• Upgrade via Mini-USB
Network -
Wireless
• Non-DFS Frequencies:
• US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
• EU & JP: 5.19 ~ 5.23 GHz
• DFS Frequencies:
• US: 5.27 ~ 5.55 GHz and 5.67 GHz
• EU & JP: 5.27 ~ 5.67 GHz
Rf Power
• 22dbm EIRP(with two 5dbi TX antennas)
Range
• Up to 3000ft line of sight
Unicast Multicast
• Unicast / Multicast
Noise Rejection
• Can coexist with WiFi and 5GHz cordless phones
Power -
Power Input
• 2-Pin Lemo 7-28 VDC
Battery
• None
Nominal Power Consumption
• 7.5 Watts (Measured at 1080p60)
Operating Temperature
• 0 ~ 50 deg-C
General -
Mountability
• Multiple mounting options with 4-40 holes
• Multiple mounting options with 1/4" holes
Bolt Pro 3000 3G-SDI Rx
Video -
Video Outputs
• 1 x USB 3.0 micro B receptacle
• 1 x 75 Ohm BNC
Color Sampling
• Y:Cb:Cr = 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v.1.1.0 or later)
Delay Tx To Rx
• <0.001sec (when no video format conversion is enabled)
Inputs -
Supported Resolutions
• 1080p60/59.94/50/30/29.97/25/24/23.98
• 1080psf30/29.97/25/24/23.98
• 1080i60/59.94/50
• 720p60/59.94/50
• 480i(NTSC)/576i(PAL)
Protocol Support -
Encryption
• AES-128
Audio Processing -
Audio Compression
• 48kHz 24-bit PCM
Physical -
Dimensions
• 5.5” x 3.5” x 1.0” (139 x 88.5 x 25 mm)
Weight
• 13.3oz(376g)
Chassis Material
• Milled Aluminum
Interfaces -
Frontpanel
• OLED LCD Screen with Menu Joystick Navigation
Desktop App
• Feature-rich Bolt Manager Application for OSX & Windows