What's In The Box?
Comes with a Bolt Pro 3000 3G-SDI/HDMI Transmitter, a Bolt Pro 3000 3G-SDI/HDMI Receiver, and a case
General
- 2 x SDI BNC to BNC 10 in. Cable
- 2 x HDMI Type A to Type A 18 in. Cable
- 1 x Protective SKB Case - military-standard waterproof hard case with custom foam (13.5in x 9.5in x 6.5in - 34.29cm x 24.13cm x 16.51cm)
- 1 x 1-Year Warranty
Transmitter
- 2 x Wireless Antennas (5dBi 5.8GHz)
- 1 x 2-pin Lemo to PowerTap 18 inch Cable
- 1 x Hot Shoe Adapter (1/4"-20 inch)
- 1-Year Warranty
Receiver
- 1 x Lightstand Adapter (1/4"-20 inch)
- 1 x Thumb Screw Plastic Head 1/4-20 thread, 1.25 length
- 1 x PSU 2-Pin Lemo to 18W AC Adapter 6ft cable
- 5 x Wireless Antennas (2dBi 2.4/5.8GHz) - For Rx
- 1 x USB 3.0 Cable A to Micro B (3ft Length)
- 1-Year Warranty
Bolt Pro 3000 3G-SDI/HDMI Tx
Video -
Video Inputs
- • 1 x 75 Ohm BNC
- • 1 x Type A receptacle HDMI
Video Outputs
- • 1 x 75 Ohm BNC(Loop-out)
Color Sampling
- • Y:Cb:Cr = 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v.1.1.0 or later);
- • RGB 4:4:4 (HDMI out, 8-bit color)
Delay Tx To Rx
- • <0.001sec (when no video format conversion is enabled)
Inputs -
Supported Resolutions
- • 1080p60/59.94/50/30/29.97/25/24/23.98
- • 1080psf30/29.97/25/24/23.98
- • 1080i60/59.94/50
- • 720p60/59.94/50
- • 480p59.94/576p50 (via HDMI ports only)
- • 480i(NTSC)/576i(PAL)
Physical -
Dimensions
- • 0.95" x 2.6" x 4.47" (24 x 66 x 101.5 mm)
Weight
Chassis Material
Interfaces -
Frontpanel
Desktop App
- • Feature-rich Bolt Manager Application for OSX & Windows
Usb Power
Network -
Wireless
- • Non-DFS Frequencies:
- • US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
- • EU & JP: 5.19 ~ 5.23 GHz
- • DFS Frequencies:
- • US: 5.27 ~ 5.55 GHz and 5.67 GHz
- • EU & JP: 5.27 ~ 5.67 GHz
Rf Power
- • 22dbm EIRP(with two 5dbi TX antennas)
Range
- • Up to 3000ft line of sight
Unicast Multicast
Noise Rejection
- • Can coexist with WiFi and 5GHz cordless phones
Power -
Power Input
Battery
Nominal Power Consumption
- • 7.5 Watts (Measured at 1080p60)
Operating Temperature
General -
Mountability
- • Multiple mounting options with 4-40 holes
- • Multiple mounting options with 1/4" holes
Bolt Pro 3000 3G-SDI/HDMI Rx
Video -
Video Outputs
- • 1 x USB 3.0 micro B receptacle
- • 1 x 75 Ohm BNC
- • 1 x Type A receptacle HDMI
Color Sampling
- • Y:Cb:Cr = 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v.1.1.0 or later);
- • RGB 4:4:4 (HDMI out, 8-bit color)
Delay Tx To Rx
- • <0.001sec (when no video format conversion is enabled)
Inputs -
Supported Resolutions
- • 1080p60/59.94/50/30/29.97/25/24/23.98
- • 1080psf30/29.97/25/24/23.98
- • 1080i60/59.94/50
- • 720p60/59.94/50
- • 480p59.94/576p50 (via HDMI ports only)
- • 480i(NTSC)/576i(PAL)
Physical -
Dimensions
- • 5.5” x 3.5” x 1.0” (139 x 88.5 x 25 mm)
Weight
Chassis Material
Interfaces -
Frontpanel
- • OLED LCD Screen with Menu Joystick Navigation
Desktop App
- • Feature-rich Bolt Manager Application for OSX & Windows
Usb Power
Network -
Wireless
- • Non-DFS Frequencies:
- • US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
- • EU & JP: 5.19 ~ 5.23 GHz
- • DFS Frequencies:
- • US: 5.27 ~ 5.55 GHz and 5.67 GHz
- • EU & JP: 5.27 ~ 5.67 GHz
Rf Power
- • 17dbm EIRP(with one 2dbi TX antenna)
Range
- • Up to 3000ft line of sight
Unicast Multicast
Noise Rejection
- • Can coexist with WiFi and 5GHz cordless phones
Power -
Power Input
Battery
Nominal Power Consumption
- • 8.5 Watts (Measured at 1080p60)
Operating Temperature
General -
Mountability
- • Multiple mounting options with 4-40 holes
- • Multiple mounting options with 1/4" holes
Overview
With highly refined software, new wireless radios, and a redesigned chassis, these new models are the most reliable and capable monitoring solutions we have ever built. Metadata and timecode support, 3D LUTs, dual inputs/outputs, multicast capable (1 Transmitter can multicast up to 4 Receivers), manual frequency selection and USB 3.0 GRAB Engine are all included on these new models but with the following new features:
|
Longer Range
Transmit visually lossless video up to 3000ft with no delay.
|
|
20MHz Channels
Use more than twice as many Bolts in one location or avoid interference like never before.
|
|
2 New DFS Channels
Operate interference-free more often in the USA and Europe by making use of two newly introduced DFS channels.
|
|
20% Smaller Chassis
Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed.
|
|
Individual Identity
Easily identify which Bolt TX and RX work together with removable colored top plates.
|
|
Rapid Reconnection
Reconnect times during a dropped link are now instantaneous once you move back into range.
|
|
Built-In HDMI to SDI Converter
Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device.
|
|
More Robust Than Ever Before
Reach your Bolt’s full range and potential right out of the box with new software that provides the most robust wireless link we’ve ever created.
|